 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Technical Specs
System |
Clarus 1 |
Clarus 2R |
Frequency Response |
20 Hz - 20 kHz, ± 0.5 dB |
|
Distortion |
<0.5% full output, <0.1% typical |
|
Hum and Noise |
-85 dB or better |
|
AC Power |
115V/60Hz, 230/50Hz, switchable |
|
Size |
10.2 x 8.2 x 3.5 inches |
|
Weight |
less than 5 pounds |
|
Preamp (mic and instrument inputs through combo jack) |
||
Mic Input |
600 ohm balanced, XLR connector |
|
Phantom Power |
48 volts, on/off switch w/LED indicator |
|
Instrument Input |
1 Mohm impedance, 1/4" jack |
|
Direct Out |
+4 dB, balanced, XLR connector, ground lift, pre/post EQ selector |
|
Effects Loop |
Parallel type with return level control |
|
Bass Control |
Shelving type, ±15 dB @ 60 Hz |
|
Mid Control |
±15 dB @ 650 Hz |
|
Treble Control |
Shelving type, ±25 dB @ 10 kHz |
|
Notch Filter |
>-18 dB sweepable from 30 to 800 Hz |
|
|
Low Cut Filter |
-12 dB/octave sweepable from 30 to 800 Hz |
|
Effects |
||
Type |
Digital with 6 presets and level control |
|
Program presets |
3 reverb (hall, room, plate), delay, ambient chorus, flange |
|
Power Amp |
||
Topology |
Class D (PWM) |
|
Switching Frequency |
200 kHz |
|
Output Power |
>250 Watts (8ohm) |
|
Minimum Load |
2 ohms |
|
Output Connectors |
Neutrik Speakon type (pole 1) |
|
Included Accessories |
Gig bag with shoulder strap, Speakon to 1/4 inch adapter |
|
