Technical Specs


Frequency Response

30 Hz-18 kHz (40-14 kHz ±3 dB)


>118 dB/m (Ten2)

AC Power

100V to 240V, 50/60 Hz automatically switched


17" H x 15"W x 13" D


32 lbs


Frequency Response

20 Hz - 20 kHz (±0.5 dB)

Signal to Noise Ratio >110 dB at direct out
Controls and Inputs

Mic Input

600Ohm balanced, XLR connector, switchable 10 dB gain

Phantom Power

48 volts, on/off switch w/LED indicator

Instrument Input

1 Mohm impedance, 1/4" jack

Direct Out

+4 dB, balanced, XLR connector, ground lift, pre/post EQ selector, switchable 10 dB pad

Effects Loop

Parallel type

Low Control

Shelving type, ±12 dB at 50 Hz

Low Mid Control

±12 dB at 250 Hz

Hi Mid Control

±12 dB at 1200 Hz

Treble Control

Shelving type, ±12 dB at 8 kHz

Phase Reversal

Switchable 180° phase reversal

Low Cut Filter

-12 dB/octave sweepable from 30 to 150 Hz

Speaker Emulator

(if selected) -12 dB/octave at 4 kHz



24 bit digital with 3 programs


Reverb with variable decay time,
Delay/Reverb with variable delay time
Delay with variable delay time
All have variable wet/dry mix and “pseudo stereo” capability

Power Amp


Class D (PWM)

Switching Frequency

500 kHz

Output Power 8 Ohm

300W rms continuous, 350W rms music
(40% duty cycle), 500W peak transient

Output Power 500W rms continuous, 650W rms music
(40% duty cycle), 1000W peak transient

Ext Speaker Output

Speakon type (pole 1), 2W min load including internal speakers, if connected

Speaker Components


Dual 10 inch, one downfiring with level control, one forward firing


2.5 inch forward firing with attenuation control


Passive, alignment corrected

Impedance 4Ohm
Power Rating 500W

Included Accessories

Fitted slip cover with cord storage pocket and shoulder strap